Positioning of the bubble
You can position a bubble in two ways:
- Either you can set Auto positioning where YesElf would position it in the best place considering available space.
- Or you can manually define the preferred location of the bubble.
Tip: YesElf would show the bubble in your preferred position as long as there is enough space to show it. In case the bubble doesn’t fit because the bubble is big or space is limited, YesElf would override your preferred position and place it in the most suitable palace in the clockwise direction.
Read about: Step Properties
By default, the bubble position is set to Auto. We recommend keeping it in auto mode as YesElf would automatically find the best position and place it dynamically.
If you have a preferred location, make your selection and save your settings.
As in the example above, the preferred position was set up to be Top.
However, YesElf has overridden that option and placed the bubble on the right side of the chosen element because the bubble would not fit in the space preferred position. Following the clockwise rotation, the right side of the chosen element was the first available. That is why the bubble is now positioned on the right side. Should even the right side would not be available, then the bubble would be placed below the element.